Kit Includes
2 x Saddles
4 x Stainless Screws or Pop-Rivets
1 x 5mm Eye/Eye Turnbuckle
2 x 3mm Thimble and Ferrule (swage) All you need to add is 3.2mm wire rope and you have everything you will need to build a stylish new Stainless Wire Rope Balustrade.
At one end you will use:
1 x Saddle
2 x Screws or Pop-Rivets
1 x Thimble and Ferrule At the other end:
1 x Saddle
2 x Screws or Pop-Rivets
1 x Thimble and Ferrule
1 x Eye/Eye Turnbuckle (to tension the wire) You will also need to type the lengths and quantities required into the comments section during the checkout process If you are not sure how many wires/kits you require see our Balustrade Regulations page for more information.  
  
 
|
Home 
